Skip to main content
- Make sure your Fanvil phone is in a factory reset state. You can do this through the phone's GUI or through its web portal interface.
- Log into the phone's web portal interface. Default username/password is admin/admin
- Click "Auto Provision" at the top
- In the "Static Provisioning Server" section, do the following:
- Set "Server Address" to the proper provisioning URL in the Cloud PBX "Provisioning" area
- Set "Protocol Type" to HTTP
- Set "Update Mode" to Update After Reboot
- Click "Apply" down below to save
- In the "AutoProvision Now" section, click "Auto Provision Now"
- Let the phone reboot, upgrade, etc.
Please sign in to leave a comment.