Fanvil IP Phone

Fanvil IP Phone

  1. Make sure your Fanvil phone is in a factory reset state. You can do this through the phone's GUI or through its web portal interface.
  2. Log into the phone's web portal interface. Default username/password is admin/admin
  3. Click "Auto Provision" at the top
  4. In the "Static Provisioning Server" section, do the following:
    1. Set "Server Address" to the proper provisioning URL in the Cloud PBX "Provisioning" area
    2. Set "Protocol Type" to HTTP
    3. Set "Update Mode" to Update After Reboot
  5. Click "Apply" down below to save
  6. In the "AutoProvision Now" section, click "Auto Provision Now"
  7. Let the phone reboot, upgrade, etc.

Screen_Shot_2021-03-11_at_2.29.20_PM.png

    • Related Articles

    • Polycom Phone

      How do I provision my Polycom phone? NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps. You will need the ...
    • Grandstream Phone

      How do I provision my Grandstream phone? NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps. You will need the ...
    • Cisco Phone

      How do I provision my Cisco phones? Applies to Models SPA30x / SPA5xxx NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the ...
    • Yealink Phone

      How do I provision my Yealink phone? NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps. You will need the ...
    • Cisco Phone

      A common practice when troubleshooting and provisioning IP devices is the factory reset, or a full restoration of the phone to its factory settings. It is important to understand that while factory resetting a phone is a great backup plan if a device ...