Locking a Yealink desk phone will prevent unauthorized users from accessing the phone's menu, call history, directory, etc. It will also prevent unauthorized users from being able to dial out of the phone except when calling emergency services.
How do I Lock my Yealink desk phone with a PIN?
Before you lock your phone, you'll want to change the phone's default PIN code.
1. Start by accessing the Menu and selecting Settings.
2. Under Basic Settings, scroll down to the Change PIN option.
3. Enter the Old PIN, the default is 123. Scroll down to enter your new PIN and scroll down again to confirm your new PIN.
4. Once you save your new PIN you'll be brought back to the previous menu. Scroll down and select Phone Lock.
5. Enter your PIN when prompted then scroll to the left or right under Lock Enable to enable or disable the phone lock feature.
6. Lastly, scroll down to option 3, Auto Lock, to set the duration of time the phone will automatically lock after. This option is in seconds and can be anywhere from 0 to 3600.
Related Articles
Yealink T33G User's Guide
Yealink T33G User's Guide Below is a diagram of a Yealink T33G IP Phone. The features, keys, and functions you will learn throughout this user's guide will be the same across most Yealink phone models. Line Keys: Holds programmable buttons such as ...
Yealink T31G User's Guide
Yealink T31G User's Guide Below is a diagram of a Yealink T31G IP Phone. The features, keys, and functions you will learn throughout this user's guide will be the same across most Yealink phone models. Line Keys: Allow you to select a line to dial ...
Yealink Phone
How do I provision my Yealink phone? NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps. You will need the ...
Yealink Phone
A common practice when troubleshooting and provisioning IP devices is the factory reset, or a full restoration of the phone to its factory settings. It is important to understand that while factory resetting a phone is a great backup plan if a device ...
Registering Your Yealink Cordless Handset
Registering your Yealink Cordless Handset (W56H) to a W52B/W60B Base Station: 1. Press and hold the Signal Button on the base station until the handset LED (Indicated by the red arrow above) starts flashing (Registration Mode). 2. Once the base ...