Manually Provisioning a ReadyNet LTE520

Manually Provisioning a ReadyNet LTE520

ReadyNet LTE520 Settings


  1. Minimum Firmware Version: v3.32 - Released in 2020
Screen_Shot_2020-08-26_at_5.27.57_PM.png

  1. SIP Transport: TCP (UDP will NOT function!)
Screen_Shot_2020-08-26_at_5.27.05_PM.png
 
  1. Signal Port: 4242
  2. Register Refresh Interval: 600
Screen_Shot_2020-08-26_at_5.26.49_PM.png

  1. Outbound Server: Use any of the "New Generation, No Redundancy" A-Records in [this article].
  2. Backup Outbound Server: Use any of the "New Generation, No Redundancy" A-Records in [this article].
  3. Outbound Port: 4242
  4. Backup Outbound Port: 4242
  5. Display Name: The SIP UserID given to you by a Primevox Technician. (Typically, the ContainerID + "e" + extension number)
  6. Account: Same as Display Name
  7. Phone Number: Same as Display Name
  8. Password: The SIP Password given to you by a Primevox Technician. (This is found in the PBX GUI when you edit an extension)
Screen_Shot_2020-08-26_at_5.26.35_PM.png

    • Related Articles

    • Manually Provisioning a Cisco ATA

      Overview You will need the following information to complete the steps below: The Provisioning URL. From the PBX Admin Portal, navigate to Extensions → Provisioning. (The following screenshots apply to both provisioning articles below.) How Do I ...

    • Manually Provisioning Cisco Phones

      Overview Applies to Models SPA30x / SPA5xxx You will need the following information to complete the steps below: A. The IP address of the Cisco phone. On the phone, press the Setup button (), navigate to Settings > Network Configuration. Scroll to ...

    • Manually Provisioning a Snom PA-1 Paging Box

      Important Firmware Requirement Before provisioning, the Snom PA-1 must be upgraded to firmware version 8.7.5.75. You can download and install the firmware manually using the following link: https://service.snom.com/display/wiki/FW+v8.7.5.75+MRU+PA1 ...

    • Manually Provisioning a Yealink Phone

      Overview NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps. You will need the following information to complete ...

    • Manually Provisioning a Grandstream Phone

      Overview Provisioning a Grandstream phone connects it to your phone system so it can make and receive calls using the correct settings. This guide will walk you through the basic steps to get your Grandstream device up and running, whether you're ...