Yealink Phone
How do I provision my Yealink phone?
NOTE: If the phone you are about to provision was previously purchased from or provisioned by another service provider, please reset your phone before proceeding with the following steps.
You will need the following information to complete the steps below:
A. The IP address of the Yealink phone. On the phone, navigate to Menu > Status > General (or, alternatively, to Menu > Status > Network > IPv4 Status); and
B. The Provisioning URL. From the PBX Admin Portal, navigate to Extensions > Provisioning.
STEPS:
1. Launch your internet browser (Google Chrome is preferred).
2. Enter the IP address (item A above) of the Yealink phone into your browser.
3. When prompted enter the default login/password of admin / admin.
4. Navigate to Settings > Auto Provision.
5. Set PNP Active to OFF. (this disables UPNP hijacking)
6. Set DHCP Active to OFF. (this disables DHCP OPTIONS hijacking)
7. Set the Server URL to the Provisioning URL (item B above).
8. Click Confirm to save the change.
9. Click Auto Provision Now to force the system to provision the phone immediately
-OR-
Physically reboot your phone at a later time.
Important Note about W80DM and W80B Units: In the Extensions > Provisioning area, you only need to add the DM (Device Manager) MAC address to provisioning. The B "base" units do not need to be added to provisioning. They will obtain their settings over the customer's network after they connect to the DM unit.
Related Articles
Yealink T33G User's Guide
Yealink T33G User's Guide Below is a diagram of a Yealink T33G IP Phone. The features, keys, and functions you will learn throughout this user's guide will be the same across most Yealink phone models. Line Keys: Holds programmable buttons such as ...Yealink T31G User's Guide
Yealink T31G User's Guide Below is a diagram of a Yealink T31G IP Phone. The features, keys, and functions you will learn throughout this user's guide will be the same across most Yealink phone models. Line Keys: Allow you to select a line to dial ...Yealink Phone
A common practice when troubleshooting and provisioning IP devices is the factory reset, or a full restoration of the phone to its factory settings. It is important to understand that while factory resetting a phone is a great backup plan if a device ...Locking a Yealink Desk Phone
Locking a Yealink desk phone will prevent unauthorized users from accessing the phone's menu, call history, directory, etc. It will also prevent unauthorized users from being able to dial out of the phone except when calling emergency services. How ...Registering Your Yealink Cordless Handset
Registering your Yealink Cordless Handset (W56H) to a W52B/W60B Base Station: 1. Press and hold the Signal Button on the base station until the handset LED (Indicated by the red arrow above) starts flashing (Registration Mode). 2. Once the base ...